Part Number Hot Search : 
L12PFI M37212 300195Z BF1211R B8279 BYG23T MBRB2 E3SGS3B4
Product Description
Full Text Search
 

To Download SMA36 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 LITE-ON SEMICONDUCTOR
SMA SERIES
STAND-OFF VOLTAGE - 6.8 to 200 Volts POWER DISSIPATION - 400 WATTS
SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS
FEATURES
Rating to 200V VBR For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ps for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min
SMA
SMA
A B C
DIM. A B C D E F F D G H
MIN. 4.06 2.29 1.27 0.15 4.83 0.05 2.01 0.76
MAX. 4.57 2.92 1.63 0.31 5.59 0.20 2.62 1.52
G
MECHANICAL DATA
Case : Molded plastic Polarity : by cathode band denotes uni-directional device none cathode band denotes bi-directional device Weight : 0.002 ounces, 0.064 grams
H E
All Dimensions in millimeter
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%
CHARACTERISTICS PEAK POWER DISSIPATION AT TA = 25 C, TP = 1ms (Note 1,2) Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load (Note 3) (JEDEC METHOD)
SYMBOLS
VALUE
UNIT
PPK
Minimum 400
WATTS
IFSM
40
AMPS.
Steady State Power Dissipation at TL =75 C
PM(AV)
1.0
WATTS
Maximum Instantaneous forward voltage at 35A for unidirectional devices only (Note 3)
VF
3.5
Volts
Operating Temperature Range
TJ
-55 to +150
C
Storage Temperature Range
TSTG
-55 to +175
C
NOTES : 1. Non-repetitive current pulse, per fig. 3 and derated above TA= 25 C per fig.1. REV. 2, 01-Dec-2000, KSIA01 2. Thermal Resistance junction to Lead 3. 8.3ms single half-sine wave duty cycle= 4 pulses maximum per minute (unidirectional units only).
RATING AND CHARACTERISTIC CURVES SMA SERIES
PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT
100
PEAK FORWARD SURGE CURRENT, AMPERES
FIG.1 - PULSE DERATING CURVE
FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT
60 50 40 30 20 10 0 1 2 5 10
Pulse Width 8.3ms Single Half-Sine-Wave (JEDEC METHOD)
75
50
25
10 X 1000 WAVEFORM AS DEFINED BY R.E.A.
0 0 25 50 75 100 125 150 175 200
20
50
100
AMBIENT TEMPERATURE, C
NUMBER OF CYCLES AT 60Hz
FIG.3 - PULSE WAVEFORM
TR=10us
10000
FIG.4 - TYPICAL JUNCTION CAPACITANCE
IP, PEAK PULSE CURRENT , (% )
100
Peak value (IRSM) Half value= IRSM
2
CAPACITANCE , (pF)
Uni-directional
Pulse width (TP) is defined as that point where the peak current decays to 50% of IRSM
50
1000
TJ = 25 C
Bi-directional
TP
10 x 1000 waveform as defined by R.E.A.
100
TJ=25 C
0 0 1.0 2.0 3.0 4.0 10
1
10
100
1000
T , TIME ( ms )
STAND-OFF VOLTAGE, VOLTS
FIG.5 - PULSE RATING CURVE
100
TA=150 C
FIG.6 - STEADY STATE POWER DERATING CURVE
PM(AV), STEADY STATE POWER DISSIPATION (W)
1.0
PP, PEAK POWER ( KW )
0.8
10
NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIG 3.
0.6
0.4
1.0
5.0mm LEAD AREAS
0.2
60Hz RESISTIVE OR INDUCTIVE LOAD
0.1
0.1us 1.0us 10us 100us 1.0ms 10ms
0.0 0 25 50 75 100 125 150 175 200
TP, PULSE WIDTH
TL, LEAD TEMPERATURE
REV. 2, 01-Dec-2000, KSIA01
LITE-ON SEMICONDUCTOR
Maximum Reverse Leakage at VRWM IR (uA) 1000 1000 500 500 200 200 50.0 50.0 20.0 20.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Maximum Reverse Voltage at IRSM (Clamping Voltage) VRSM(Volts) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3
Device Unidirectional
Device Bidirectional
Device Marking code
Breakdowm voltage VBR Volts
Working PeakReverse Voltage VRWM(Volts) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8
Maximum Reverse Surge Current IRSM(Amps) 37.0 38.1 34.2 35.4 32.0 33.1 29.0 29.8 26.7 27.6 24.7 25.6 23.1 23.9 21.0 22.0 18.2 18.7 17.0 17.8 15.1 15.7 13.7 14.4 12.5 13.1 11.5 12.0 10.2 10.7 9.2 9.7 8.4 8.8 7.7 8.0 7.1 7.4 6.5 6.7
(UNI) SMA6.8 SMA6.8A SMA7.5 SMA7.5A SMA8.2 SMA8.2A SMA9.1 SMA9.1A SMA10 SMA10A SMA11 SMA11A SMA12 SMA12A SMA13 SMA13A SMA15 SMA15A SMA16 SMA16A SMA18 SMA18A SMA20 SMA20A SMA22 SMA22A SMA24 SMA24A SMA27 SMA27A SMA30 SMA30A SMA33 SMA33A SMA36 SMA36A SMA39 SMA39A SMA43 SMA43A SMA6.8C SMA6.8CA SMA7.5C SMA7.5CA SMA8.2C SMA8.2CA SMA9.1C SMA9.1CA SMA10C SMA10CA SMA11C SMA11CA SMA12C SMA12CA SMA13C SMA13CA SMA15C SMA15CA SMA16C SMA16CA SMA18C SMA18CA SMA20C SMA20CA SMA22C SMA22CA SMA24C SMA24CA SMA27C SMA27CA SMA30C SMA30CA SMA33C SMA33CA SMA36C SMA36CA SMA39C SMA39CA SMA43C SMA43CA ADK AEK AFK AGK AHK AKK ALK
(BI) ADM AEM AFM AGM AHM AKM ALM
Min. 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9
Max. 7.48 7.13 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.3 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2
@IT( mA) 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
AMK AMM ANK APK AQK ARK ASK ATK AUK AVK ANM APM AQM ARM ASM ATM AUM AVM
AWK AWM AXK AYK AZK BDK BEK BFK BGK BHK BKK BLK AXM AYM AZM BDM BEM BFM BGM BHM BKM BLM
BMK BMM BNK BPK BQK BRK BSK BTK BUK BVK BNM BPM BQM BRM BSM BTM BUM BVM
BWK BWM BXK BYK BZK BXM BYM BZM
Device Unidirectional
Device Bidirectional
Device Marking code
Breakdowm voltage VBR Volts
Working PeakReverse Voltage VRWM(Volts) 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171
Maximum Reverse Leakage at VRWM IR (uA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
Maximum Reverse Surge Current IRSM(Amps) 5.90 6.17 5.44 5.71 4.97 5.19 4.49 4.71 4.08 4.35 3.70 3.88 3.39 3.54 3.05 3.20 2.78 2.92 2.53 2.63 2.31 2.42 2.14 2.23 1.86 1.93 1.74 1.83 1.64 1.71 1.55 1.63 1.39 1.46
Maximum Reverse Voltage at IRSM (Clamping Voltage) VRSM(Volts) 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274
(UNI) SMA47 SMA47A SMA51 SMA51A SMA56 SMA56A SMA62 SMA62A SMA68 SMA68A SMA75 SMA75A SMA82 SMA82A SMA91 SMA91A SMA100 SMA100A SMA110 SMA110A SMA120 SMA120A SMA130 SMA130A SMA150 SMA150A SMA160 SMA160A SMA170 SMA170A SMA180 SMA180A SMA200 SMA200A NOTE : SMA47C SMA47CA SMA45C SMA45CA SMA56C SMA56CA SMA62C SMA62CA SMA68C SMA68CA SMA75C SMA75CA SMA82C SMA82CA SMA91C SMA91CA SMA100C SMA100CA SMA110C SMA110CA SMA120C SMA120CA SMA130C SMA130CA SMA150C SMA150CA SMA160C SMA160CA SMA170C SMA170CA SMA180C SMA180CA SMA200C SMA200CA CDK CEK CFK CGK CHK CKK CLK
(BI) CDM CEM CFM CGM CHM CKM CLM
Min. 42.3 44.7 45.9 48.5 50.4 53.2 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.8 81.9 86.5 90.0 95.0 99.0 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190
Max. 51.7 49.4 56.1 53.6 61.6 58.8 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.0 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210
@IT( mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
CMK CMM CNK CPK CQK CRK CSK CTK CUK CVK CNM CPM CQM CRM CSM CTM CUM CVM
CWK CWM CXK CYK CZK RDK REK RFK RGK RHK RKK RLK CXM CYM CZM RDM REM RFM RGM RHM RKM RLM
RMK RMM RNK RPK RQK RRK RSK RTK RNM RPM RQM RRM RSM RTM
1) Suffix 'A ' denotes 5% tolerance device,no suffix denotes 10 % tolerance device. 2) Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double . 4) For Uni-directional devices VF max=3.5v at if=35 A ,0.5 sine wave of 8.3 msec .pulse width.


▲Up To Search▲   

 
Price & Availability of SMA36

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X